- Flow control during print in print settings as in every other printer I own
- Implemented linear advance tuning out of the tuning menu
There is flow control, or i misunderstood something?
@andrivet I mean by that a live adjustmend of the extrusion multiplier…
and additionnaly would be nice to have the possibillity, to set the k-factor of lin adv in more increments. 0.11 for example instead of just 10 percent steps…
Another question: did you change the home offsets? my feeling is, that the printer starts more to the right and more to behind than before…
Thanks again
edit: ok - M206 says no offsets are set… so it’s just the homing position that cheated on me I think
Please, do not mix different, unrelated, questions in the same topic. One subject, one topic.
So for your second question, it may be related to safe homing. I will change that in version 4.0.1 (for those without a sensor).
sorry… so here the new list fitting the topic:
- Extrusion multiplier andjustment during print in print settings (as in every other printer I own)
(- Implemented linear advance tuning out of the tuning menu… → would maybe use to much space) - Possibillity to set 1% steps of K-Faktor instead of just 10% steps (for example 0.15 instead of just 0.1 or 0.2)