Estou com dificuldade de resolver essa problema.
In english please.
Display is locked
Do not leave this image
You give no information. I don’t down what printer you have, what you have done. Etc. Please give the required information.
made updated printer ADVi3++ version 4.0.3
model Wanhao Duplicator i3 plus
I tried to redo the process but after it finishes passing all the images it goes back to that
Very likely, the cable between the LCD panel and the motherboard is not well connected. Check the connectors.
They are all connected correctly
I used o IMainboard EEPROM erase image
I don’t know if there’s a problem
Have power off and then power on the printer (after removing the microSD card)
makes the whole process appears all the images when you restart go back to the image
Have you flashed also the mainboard part?
if it goes back to the factory standard it will work again ???
What do you mean by that?
reset the LCD has a program that does that
Which program? What are you talking about, I don’t understand.
original printer system
“makes the whole process appears all the images when you restart go back to the image” Then u didnt remove the microSD out of the screen?